2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-8
–
Place
the aluminium side profiles onto both edges of the glass side panels (see Drawing 2-3).
–
Mount
the aluminium side profiles on the glass side panels, using 4.2 x 12 mm screws (see
Drawing 2-3).
–
Mount
the glass rear panel and the glass side panels using M4 x 20 mm bolts and nuts, in-
cluding the washers (see Drawing 2-4).
A = The distance from the back of the glass to the outer edge of the shower basin.
Place washers between the bolts and nuts on both sides.
–
Mount
the hinges to the glass door and the
fixed glass panel, using M4 x 20 mm bolts (see Drawing 2-5).
–
Mount
the door grip onto the glass door using
4.2 x 12 mm screws. Next,
place
the covers (see Drawing 2-5).
–
Place
the fixed glass panel with the hinges and the other fixed glass panel onto the shower
basin (see Drawing 2-6).
Mount
these fixed glass panels on both sides into the aluminium
side profiles of the side panels. Finally,
mount
the plastic strip in-between the glass and the
profile. Use the small plastic block to do this.
To facilitate the mounting of
the strips, you can use a little soap.
Use a small wooden or plastic block to push the
plastic strips into the grooves of the aluminium side profiles.
Drawing 2-3
Drawing 2-4
A
1
= A
2
A
1
A
2
4.2 x 12 mm
M4 x 20 mm bolts
and nuts with washers
Small block
Drawing 2-5
Drawing 2-6
Plastic strip
4.2 x 12 mm
and covers
