2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-16
10.
Move
the shower cubicle backward, flush
against the wall; and
inspect
the shower cubicle.
–
Check
to make sure all bolt, nut and
screw connections are sufficiently tightened.
–
Check
the shower cubicle to make sure there are no leakages.
–
Make sure
the sliding doors slide smoothly.
–
Make sure
that the magnetic strips on the
sliding doors are correctly positioned opposite each other.
–
Seal
the shower cubicle using acid-free sealant
and
allow
the sealant to thoroughly dry (see Drawing 10-1).
–
Remove
the packaging material of the steam dispenser (see Drawing 10-2).
Do not seal the water-return
grooves of the shower basin.
Only make use of acid-free sealant. Allow the sealant to dry
for 24 hours before using the shower cubicle for the first time.
Drawing 10-1
Drawing 10-2
