2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-10
4.
Mount
the cubicle roof onto the shower cubicle.
–
Position
the cubicle roof (see Drawing 4-1).
Note: make sure the shower panels
and the cubicle roof are correctly connected
–
Mount
the cubicle roof onto the fixed glass side panels using M4 x 20 mm
bolts and nuts (including transparent bushes, washers and covers) (see Drawing 4-2).
–
Mount
the cubicle roof onto the rear panel and the side panels
using M4 x 20 mm bolts and nuts, including the washers (see Drawing 4-3).
Place washers between the bolts and nuts on both sides.
While tightening the bolts and nuts, always
check whether the shower panels are properly aligned.
Drawing 4-1
Drawing 4-3
Drawing 4-2
M4
Drill hole
of Ø 5 mm
M4
x 20 mm
Ø 4mm
Washer
Cover
M4 x 20 mm bolts and nuts
with washers
