CUSTOMER SERVICE: 800-973-8374
25
II. INSTALLATION
III. SPECIFICATIONS
I. PROFILE OF REMOTES STAND
INSTALLATION DIAGRAM
1. Refer to drawing in Part I. Plug the remote
stand into the 120V AC power strip outlet
under the bed.
2. Plug light electrical devices into the remote
stand outlets as desired.
3. Plug USB cord in front to charge your mobile
devices.
4. Place your remote in the cradle of the front
side of the stand for storage.
1. Model Number: RC-STAND-R02
2. Power Rating: AC120V, 300W
3. Housing: ABS
4. Indicator Lamp: 1/4 W power on lamp
5. Outlets: 2 outlets on back of stand
6. Cable: 1.8M / UL
7. Surge Protection: 125 joules
8. USB Charger : 5V, 2A
CAUTION:
This device is only to be
used to control light household electrical
appliances such as lamps, phone
chargers, and laptop computers.You
should never plug heaters or other items
with heating elements into this device.
To avoid accident or
injury, please read the
following instructions
before use.
1. The stand is for indoor use only.
’
moisture.
3. Plug the remote stand into the power strip
as in the diagram to avoid a short circuit.
4. To avoid electrical shock, do not insert
objects other than electrical plugs into outlet
openings.
5. Before use, please ensure local voltage and
power are in accordance with the remote
stand requirements.
to the remote stand.
Failure to comply will void the manufacturer
’
s
warranty.
7. Do not use the stand if the stand has been
damaged in any way.
’
remote stand.
9. To clean, unplug the remote stand from the
power strip and use a damp cloth.
AC Plug
Electrical
Appliance
with heating element
Indicator Lamp
Back Side
Front Side
Power Outlet
USB
Charger
’
