CUSTOMER SERVICE: 800-973-8374
22
NOTE: The included remote is
already paired with your power base.
No further action is required. Only
replacement remote controls require
use programming.
1 Wireless Remote Control
2 Power Bases
Use the same remote to pair with two
power bases following the programming
procedures in steps 3-6 above, and
directions below.
NOTE:
If a new signal is not received it will
reset itself to normal mode in 10 seconds.
STEP 1
STEP 4
STEP 5
STEP 6
STEP 2
STEP 3
Place batteries into a remote control
(3 x AAA batteries)
When the Green LED signature light
illuminates, the RF frequency code setting
function will be activated.
Press any button on the remote control.
completed the learning process of the RF
frequency code.
Ensure the power base is plugged into a
functioning outlet.
Press the learn button for 3 seconds.
Figure 1: Press “Learn Button” to
initiate the RF learning mode.
indicates the control box has
received the remote control signal.
PAIRING INSTRUCTIONS FOR
JOINING 2 BASES
Replacement Remote Control Programming
