CUSTOMER SERVICE: 800-973-8374
13
Power Base Assembly Instructions
STEP 10
Install the headboard brackets to the power
base. Place one bracket on the left-hand side
of the power base and one bracket on the
right-hand side of the power base.
NOTE:
If the power base is to be set
up without a headboard, simply install a
mattress on the frame. If a headboard is to
be installed, proceed to step 10.
NOTE:
It is important to position the bottom
of the headboard cross member a maximum
distance of 3 inches (76.2 mm) between the
headboard and the top of the mattress. Do
not exceed 3 inches (76.2 mm).
ATTENTION:
For any King/Split King
bars for either base on head or foot.
When two Twin XLs or two Split California
Kings are put together, DO NOT install
retainer bars in the center head or center
foot sections of the bases.
