background image

CUSTOMER SERVICE: 800-973-8374

[email protected]

20

OPERATING INSTRUCTIONS:

HEAD AND FOOT ADJUSTMENTS (A,B)

•  Adjusts the head and foot sections to the 

desired positions.

POWER BASE “FLAT” BUTTON (C)

• 

when the button is pressed and held for at 
least 1 second.

PROGRAMMABLE MEMORY 
BUTTONS (D):

You can store 4 personalized memory 
positions.

•  To Set a Memory Position: When in desired 

position, press and hold Memory button 
for more than 5 seconds until the LED light 

stored.

•  To recall a Memory Position: Press Memory 

button 1 - 4 until LED lights up.

ZERO GRAVITY (E)

•  Allows your legs to be lifted to a position 

slightly above the chest, which enables 

heart, thus reducing stress and fatigue.

WAVE MASSAGE MODE (J)

•  Choose one of two presets to turn on both 

head and foot massage functions.

MASSAGE STOP BUTTONS (I)

•  Press for 2 seconds to stop all massage 

features.

NOTE: 

The “FLAT” cycle can be 

interrupted and canceled by pressing the 
head or foot adjustment buttons (A, B).

NOTE: 

Do not hold the memory button 

for more than 5 seconds otherwise a new 
memory position will be set.

NOTE: 

The lowest setting will turn off the 

corresponding massage unit.

NOTE: 

You must stop the massage before 

you can switch to another wave function or 
to the full body massage.

NOTE: 

The massage feature is designed 

to automatically shut off after 30 minutes of 
continuous use.

ANTI SNORE (F)

•  Raises the HEAD slightly for easier 

breathing.

NIGHTLIGHT ON/OFF (K)

•  Toggle between on/off functions.

HEAD AND FOOT MASSAGE CONTROLS 
(G,H)

•  Turns on the corresponding massage unit 

(starting at intensity 5 of 10)

•  Slowly increases or decreases massage 

intensity. To increase massage intensity, 
press (+) button. To decrease massage 
intensity, press (-) button.

Remote Control Operation Guide

and here

Summary of Contents for Purple Powerbase

































Reviews: