CUSTOMER SERVICE: 800-973-8374
24
Your Power Base has an emergency lowering
feature in the event that your power base is in
the raised position and has lost power due to a
power outage.
STEP 1
STEP 3
STEP 4
STEP 2
Locate and remove the cover for the 9 volt
batteries.
Press the “ FLAT ” button (C) or the individual
lower buttons (A,B) to lower the power base to
Remove the two 9 volt batteries and replace the
battery cover.
position.
Install the two (2) alkaline 9 volt batteries.
Figure 1: 9 volt batteries cover.
Figure 3: Remove the batteries
and replace the cover.
Figure 2: Install 9 volt batteries.
NOTE:
The two (2) 9 volt batteries are
only intended to be used once. After you
complete the emergency lowering, the
batteries need to be replaced with new
alkaline batteries.
Remote Control Emergency Power Down Feature
and here
