Revere COASTAL CRUISER 6P, Service Manual

Page: 42 / 130

COASTAL CRUISER
OFFSHORE OCEAN
SERVICE MANUAL
3.3.3.2.3 Inspecting the valve
Check the presence and integrity of the gasket inside the plug. Besides, check that, once plugged, the valve is
tight by pouring soaped water on the valve plug in correspondence to the gasket.
3.3.3.3 REPAIRS
The inflation valves may need the following repairs:
•
Replacement of plug holder;
•
Replacement of plug gasket;
•
Replacement of stopper;
• Replacement of valve.
3.3.3.3.1 Holder replacement
Proceed as follows:
1. Remove the holder upper end from the plug head;
2. Untighten the valve body;
3. Remove the damaged holder from the lower part of the valve body;
4. Place the new holder and tighten the valve body;
5. Fit the upper end of the holder to the plug head.
PLUG
RING
STOPPER
O.R
BODY MEMBRANE
3.14