manualshive.com logo in svg

Retigo Blue Vision Series, Operating Manual

Share
Download
Retigo Blue Vision Series Operating Manual Download Page 49

49

10  I   TABLE OF ERROR MES-

SAGES

When you work with the appliance, the display may show error messages. 
Their meanings are as follows:

Err 18

When draining the boiler, the 
water level did not fall below 
the maximum water level 
within the set time limit.

The combi oven will 
automatically switch to the 
reserve injection state and 
it is possible to continue 
using it temporarily. After 
the combi oven is turned 
off and then on again, it will 
try to start up the boiler. 
If the problem reoccurs, 
please contact an authorised 
service company.

Err 26

Flap valve error. The 
automatic flap valve is not 
working correctly.

Incorrect function of the flap 
valve may affect cooking 
results, however, it is possible 
to continue using the combi 
oven temporarily. Contact an 
authorised service company.

Err 31

Drain heat sensor error.

The combi oven can 
temporarily be used in 
all modes. Contact an 
authorised service company.

Err 33

Boiler heat sensor error.

The combi oven will 
automatically switch to the 
reserve injection state and 
it is possible to continue 
using it temporarily. After 
the combi oven is turned 
off and then on again, it will 
try to start up the boiler. 
If the problem reoccurs, 
please contact an authorised 
service company.

Err 34

Error of the 1-point 
temperature probe.

The combi oven can 
temporarily be used 
in all modes with the 
exception of the modes 
with a temperature probe. 
Contact an authorised 
service company.

Err 35

Chamber heat sensor error.

Error blocks work in 
all modes. Contact an 
authorised service company.

Err 36

Error of the 6-point 
temperature probe.

The combi oven can 
temporarily be used 
in all modes with the 
exception of the modes 
with a temperature probe. 
Contact an authorised 
service company.

Err 37

Thermistor disconnected.

Contact an authorised 
service company.

Err 38

Thermistor short-circuited.

ERROR

DESCRIPTION

SOLUTION

Err 10

The minimum water level 
was not reached in the boiler 
within the set time limit 
despite the maximum water 
level being reached.

The combi oven will 
automatically switch to the 
reserve injection state and 
it is possible to continue 
using it temporarily. After 
the combi oven is turned 
off and then on again, it will 
try to start up the boiler. 
If the problem reoccurs, 
please contact an authorised 
service company.

Err 11

Chamber heating element 
error.

The combi oven cannot 
continue operating. Contact 
an authorised service 
company.

Err 12

The maximum water level 
was not reached in the boiler 
within the set time limit.

The combi oven will 
automatically switch to the 
reserve injection state and 
it is possible to continue 
using it temporarily. After 
the combi oven is turned 
off and then on again, it will 
try to start up the boiler. 
If the problem reoccurs, 
please contact an authorised 
service company.

Err 13

The minimum water level 
was not reached in the boiler 
within the set time limit.

Check the water supply inlet 
(open tap). The combi oven 
can be used temporarily 
only in hot air mode. If 
the problem reoccurs, 
even when water supply is 
provided, please contact an 
authorised service company.

Err 15

Failure of motor heat 
protection. Signals motor 
overheating above the set 
limit.

Contact an authorised 
service company.

Err 16

The boiler was not 
preheated within the set 
time limit.

The combi oven will 
automatically switch to the 
reserve injection state and 
it is possible to continue 
using it temporarily. After 
the combi oven is turned 
off and then on again, it will 
try to start up the boiler. 
If the problem reoccurs, 
please contact an authorised 
service company.

Err 17

When draining the boiler, the 
water level did not fall below 
the minimum water level 
within the set time limit.

User manual  |  Blue Vision Combi Ovens  I

 10 ERROR MESSAGE TABLE

Summary of Contents for Blue Vision Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands