XL80 laser system
46
www.renishaw.com/xl80
Recalibration reminders
Because evidence of calibration is important for users and their customers,
there are several reminders built into both the main system hardware and
system software�
Hardware reminder
The recommended recalibration date is indicated on a label on the side of the
XL laser unit�
Software reminders
Further reminders are built into the CARTO software� If an XL laser is out
of calibration, the date of last recalibration and the recommended date for
recalibration will be displayed on-screen�
Recalibration facilities
Recalibration of the XL laser requires specialist test rigs and software to give
results comparable to the original factory calibration� Renishaw therefore
recommends that items are returned to our specialist facilities via your local
Periodic recalibrations and recalibrations following repairs (if required) are
carried out in accordance with the same procedures used for new systems
and an identical format certificate will be issued.
