17
XL80 laser system
Straightness measurement optics kit
The straightness measurement optics are used to measure straightness
errors in a linear axis� Straightness errors are displacements perpendicular
to the axis of travel, either vertical or horizontal depending on the mounting
orientation of the optics�
The straightness measurement kit is available in two versions: short range
(for measurements from 0�1 m to 4 m) and long range (for measurements
from 1 m to 30 m)�
1
2
1
1
2
3
4
Flatness measurement kit
The flatness measurement kit is used to measure the flatness of surface
plates and granite tables�
The flatness turning mirrors allow the laser beam to be directed along any line
of the surface plate without having to move the laser� A straight edge as long
as the longest measurement line is required (not supplied in the kit)�
1
Straightness reflector
2
Straightness interferometer
NOTE:
The following accessories are required when measuring vertical
straightness in a horizontal axis, or straightness in a vertical axis
of a machine:
•
Straightness shutter
•
Large retroreflector
•
Straightness base
•
LS350 laser beam steering optic
•
Fixed turning mirror
•
Adjustable turning mirror
1
Turning mirrors × 2
2
Flatness base (50 mm)
3
Flatness base (100 mm)
4
Flatness base (150 mm)
NOTE:
The angular measurement optics are also required where the angular
interferometer is attached to a turning mirror and the angular reflector is
attached on top of the selected flatness base.
