1.800.627.4499
Premium Commercial Controls
ERV
4
NOTICE
This manual contains space for maintaining written records of settings and changes. See
Section 14, Maintenance Records. At the time the ERV is commissioned, a complete record
(an operating parameter file) should be made of all settings, to include setpoints and offsets.
Whenever changes are made to the controller data points, those changes should be
recorded, along with the reason for the change.
Information that is recorded is specific to just one ERV or controller. If additional
controllers are being documented, please make copies of these pages and identify each
copy by its unit tag.
NOTICE
Whenever an operating parameter file is created in the controller internal memory, a backup
file should be created on an external memory device and stored in some convenient place.
READ AND SAVE THIS MANUAL/LIRE ET CONSERVER CE MANUEL
NOTE: This page
is to be completed
by the installing
contractor. The
completed document is
to be turned over to the
owner after start up.
NOTE: When the
ERV is first
connected to
electric power, the
unit is to be started only
for purposes of testing
correct wiring and to verify
correct operation of the
fans and dampers.
-
-
J
-
Configuration Code:
Serial Number:
SO #:
UNIT INFORMATION
Record information as shown below.
In the unlikely event that factory assistance is ever required, information located on the unit
label will be needed.
Locate the RenewAire unit label found on the outside of the unit.
NOTE: This information is for purposes of identifying the unit-specific option data from the
Configuration Code.
UNIT INFORMATION
UNIT LABEL (TYPICAL)
OWNER INFORMATION
