Renesas RZ/G1M, User Manual

Page: 76 / 184

RZ/G1M 4. Pin Multiplexing
R01UH0626EJ0100 Rev.1.00 4-41
Sep 30,2016
No.
Pin
No.
Pin Name (Function 1) I/O
During
POR
Default Pin Function
Default
State Default
Pull-up
555 N26 VDD_MLBPPLL1 - P VDD_MLBPPLL1 P -
556 P26 VSS_MLBPPLL1 - P VSS_MLBPPLL1 P -
557 K28 VCCQ18_MLBP - P VCCQ18_MLBP P -
558 N28 VCCQ18_MLBP - P VCCQ18_MLBP P -
559 K29 VCCQ33_MLBP - P VCCQ33_MLBP P -
560 N29 VCCQ33_MLBP - P VCCQ33_MLBP P -
561 P27 VTHSENSE0 O O VTHSENSE0 O -
562 N27 VTHREF0 O O VTHREF0 O -
Notes: 1. No.94, 95, 98 to 106 and 108 to 129: Default Pin Function
MD[28:27],[22] = 111: DBSC3 channel 1 32-bit operation
MD[28:27],[22] = 011 or 110: GP_DDRn (n = 1 to 29) operation
2. No.134 to 187: Default Pin Function
MD[28:27],[22] = 111: DBSC3 channel 1 32-bit operation
MD[28:27],[22] = 011: DBSC channel 0 64-bit (M0DQ[63:32] enable) operation
MD[28:27],[22] = 110: Reserved except for power supply pins.
3. No.204 and 205: AVS Default State
The output is high or low, depending on product.
4. No.213 to 254: Default Pin Function
MD[24:23] = 00: SATA1 and SATA0
MD[24:23] = 01: SATA1 and USB3.0
MD[24:23] = 10: PCIe and SATA0
MD[24:23] = 11: PCIe and USB3.0
5. No.293 to 334, 336, 337, 344, 345 and 347 to 349: Default Pin Function
MD[3:1] = 000: LBSC (D[15:0], A[25:0], CS0#, CS1#/A26, BS#, RD#, WE[1:0]# and EX_WAIT0
MD[3:1]

000: GPIO (GP0_[31:0], GP1_[11:0], [19:18] and [23:21])
6. No.337 CS1#/A26: Default State
MD4 = 0: (64-Mbyte mode): high output
MD4 = 1: (128-Mbyte mode): low output
7. No.497 and 506: Default State
"I" is in function mode (SDHI), "Z" is in debug mode.
8. No.497 to 502 and 506 to 511: Default Pin Function
Depends on MD[21:20], MD[12:10], and MDT[1:0] settings.
9. No.497 to 502 and No.506 to 511: Default Pull-up
"-" is in debugging operation only; "Off" is in other than debugging operation.