Renesas M3A-HS64, User Manual

Page: 202 / 238

M3A-HS64G02 Operating Specifications
7.2.1 Jumpers (JP1 to JP12)
Rev. 1.00 Apr 30, 2009 7-26
REJ11J0034-0100
7
7.2.1 Jumpers (JP1 to JP12)
The M3A-HS64G02 includes 12 jumpers. The following figure shows jumper assignments (JP1 to JP12) on the M3A-HS64G02.
Figure 7.2.2 M3A-HS64G02 Jumper Assignments (JP1 to JP12)
The following table lists the jumpers setting for JP1, JP2, JP3, JP5, and JP9.
Table 7.2.1 Multi-function Pin Switch Jumpers Setting (JP1, JP2, JP3, JP5, and JP9)
Number Setting Description
1 - 2
Connects the D/A converter (U10) as the SCL1 output pin
JP1
SCL1/IRQ2
2 - 3
Connects the push-button switch (SW1) as the IRQ2 input pin
1 - 2
Connects the D/A converter (U10) as the SDA1 I/O pin
JP2
SDA1/IRQ3
2 - 3
Connects the push-button switch (SW2) as the IRQ3 input pin
1 - 2
Connects the MIL-spec connector (J5) as the PWM data output pin
JP3
PWM/
(SD/SSIF/PORT)
2 - 3
Connects the SD card slot (J4), DAC (U10), and test pins (TP1 to TP4) as the SDHI, SSIF, and
PORT I/O pins
1 - 2
Connects the IEBus
TM
driver (U37) as the IETxD output pin
JP5
IETxD/CTx0
2 - 3
Connects the CAN driver (U13) as the CTx0 output pin
1 - 2
Connects the IEBus
TM
driver (U37) as the IERxD input pin
JP9
IERxD/CRx0
2 - 3
Connects the CAN driver (U13) as the CRx0 input pin