Aircraft Ground Handling and Servicing 8 - 17
Rev. 01 – 07-01-2008
8
Aircraft Ground Handling and Servicing
8.18 Propeller
Servicing
The standard propeller on the REMOS GX is manufactured by Sensenich and is made from composite
providing a white/black lacquer finish. Refer to the propeller manufacturer manual for servicing
information.
However, we strongly recommend a visual check for cracks and damage prior to each flight. Damage to
the lacquer finish may disturb the propeller balance. Therefore it is essential to repair any
failure of the
lacquer finish immediately and check/accomplish propeller balancing.
8.19 Airbox System and Air Cleaner Element
The REMOS air intake system consists of a carburetor heating system in conclusion with a special airbox.
This system needs no servicing during regular service intervals.
An air cleaner element is installed at the air intake section of the airbox, we recommend the use of K&N
air cleaner elements, part # RC-1250 (circular shape) or part # 33-2022 (rectangular shape), depending
on the type of airbox installed. If it is found that the air cleaner elements efficiency has decreased due to
dust or dirt between regular service intervals, do not try to clean the element, replace it.
Summary of Contents for G 2008 Series
Page 1: ...i...
Page 7: ...vii Rev 01 07 01 2008 Views The REMOS GX is designed as full composite carbon fiber aircraft...
Page 15: ...Airplane and Systems Description 2 5 Rev 01 07 01 2008 2 Airplane and Systems Description...
Page 47: ...Performance 5 5 Rev 01 07 01 2008 5 Performance 5 5 Pressure Altitude Diagramm...