Aircraft Ground Handling and Servicing 8 - 5
Rev. 01 – 07-01-2008
8
Aircraft Ground Handling and Servicing
8.6
Folding Wing System
The REMOS GX is manufactured at highest quality standards, all components are highly accurate and
provide a maximum aerodynamic quality. It is therefore strongly recommended to be most careful when
assembling or disassembling components like the wings, stabilizer and other parts. To fold or attach the
wings, two persons are required. The following instructions will provide you with all the necessary
information.
8.7
Preparation for Assembling and Disassembling
For assembling and disassembling the wings no additional tools are required, except the special tool for
attaching and removing the wing and stabilizer bolts. This tool is provided with the basic equipment for
the aircraft.
To prepare for assembling the stabilizer, place the stabilizer behind the aircraft on an appropriate foam
support (take care to avoid scratches and dents). Remove both stabilizer bolts from their bushes on the
stabilizer and place them nearby (prepare with grease).
If you intend to move the aircraft by trailer or to store it with wings folded, we recommend using our wing
securing aids (ask your local dealer). With these supports mounted, wings are secured properly and the
handling of the aircraft will be much easier.
When the aircraft has to be moved by trailer, please ask your authorized REMOS dealer for advice. When
placed on a trailer in a wrong way, serious damage could result.
Summary of Contents for G 2008 Series
Page 1: ...i...
Page 7: ...vii Rev 01 07 01 2008 Views The REMOS GX is designed as full composite carbon fiber aircraft...
Page 15: ...Airplane and Systems Description 2 5 Rev 01 07 01 2008 2 Airplane and Systems Description...
Page 47: ...Performance 5 5 Rev 01 07 01 2008 5 Performance 5 5 Pressure Altitude Diagramm...
