REMKO Smart Com, Instructions For Use Manual

Page: 27 / 32

Data points
CO 1)
Grp.-
addr. 2) Name 3) DPT 4) Size 5)
Communica-
tion flags 6) Function description
23 5/0/18
Unmix. HC
room temp.
DPT 9.001
(DPT_Value_T
emp)
-273°C... 670
760°C
2 byte K L - T
The room temperature con-
troller transfers the actual
temperature to the Smart
Control controller when
changed.
26 5/0/7
Room set
temperature
DPT 9.001
(DPT_Value_T
emp)
-273°C... 670
760°C
2 byte K - S -
The Smart Control controller
transfers the basic setpoint
value to the room tempera-
ture controller.
32 5/0/44
Unmix. HC
operating
mode
DPT 20.102
(DPT_HVAC-
Mode)
(0) Auto
(1) Comfort
(2) Standby
(3) Night (Eco)
(4) Protection
mode (frost/
heat)
1 byte K - S -
The Smart Control controller
transfers the operating mode
(HVACMode) to the room
temperature controller when
changed (e.g. depending on
the presence object).
33 5/0/38
Unmix. HC
presence
object
DPT 1.018
(DPT_Occu-
pancy)
(0) Not present
(1) Present
1 bit K - S T
The room temperature con-
troller transfers the presence
object (alternating each time
the presence button is
pressed) to the Smart Control
controller.
35 5/0/3
Heating/
cooling
(status)
DPT 1.100
(DPT_Heat-
Cool)
(0) Cooling
(1) Heating
1 bit K - S -
The Smart Control controller
transfers the operating mode
(HeatCool) to the room tem-
perature controller when
changed.
50 5/0/32
Unmix. HC
room target
temp.
DPT 9.001
(DPT_Value_T
emp)
-273°C... 670
760°C
2 byte K L - T
The room temperature con-
troller transfers the target
room temperature to the
Smart Control controller
when changed (e.g. via the
adjustment wheel or when
lowered).
1) Communication object (CO) number
2)
Factory setting for group addresses (GA)
3) Data point designation / 4) Data point type (DPT)
5) Data point size
6)
Communication flags:
C = Communication / R = Read / W = Write / T = Transfer
27