8
Application example
Connecting a room temperature controller
(RTC)
E.g.:
Merlin 616919
Gira 2100
Jung A2178 TS
Berker S.1 75441152
or similar
1
2
2
6
7
8
9
10
2
3
4
5
Fig. 7: Connecting a room temperature controller
(RTC)
1:
Adjustment wheel to specify the target room
temperature value
2:
LED for comfort operating mode
3:
LED for standby operating mode
4:
LED for night (time programme) operating
mode
5:
Presence button to switch between comfort
and standby
6:
LED for heating or cooling active (non-func-
tional)
7:
LED for heating mode active
8:
LED for cooling mode active
9:
LED for anti-freeze protection mode
10: LED for dew point mode (non-functional)
The address in the relevant heating circuit (e.g.
unmixed heating circuit) must be set to KNX to
activate the KNX room temperature controller's
room temperature influence.
Expert level
¯
Settings
¯
Unmixed cycle
¯
Room unit
¯
KNX
The KNX room temperature controller's current
operating mode (Status KNX), as well as the influ-
ence on the room temperature target value (KNX
target value adjustment) can be checked in the
information menu for the heating circuit (e.g.
"Expert/Information/Unmixed heating circuit").
Expert level
¯
Information
¯
Unmixed cycle
¯
KNX status
KNX setpoint adjustment
REMKO Smart Com
26
Summary of Contents for Smart Com
Page 31: ......
