9. Fit the box and slide it forwards.
10. Lock the box using the two screws and toothed washers supplied in
the bag with the manual.
11. Tilt the assembly backwards.
12. Connect the two connectors from the boiler to the connectors on the
control box.
13. Move the control box back to its original position by tilting it forwards.
14. Lock the control box in position using the two screws and the toothed
washers.
15. Close the box cover.
16. Lock the cover by pressing on the screw head.
17. Refit the front door and the rear top panel and refit the two screws and
the toothed washers.
Fig.15
MW-6000765-02
9
9
10
Fig.16
MW-6000766-02
230V
24V
11
12
12
Fig.17
MW-6000767-01
13
Fig.18
MW-6000768-02
14
14
15
Fig.19
MW-6000769-01
16
5 Installation
20
MID _HMI T-control - Gas 120 ACE
7717201 - v03 - 25062019
