background image

42

    

   

43

15180-101 Rev. F

15180-101 Rev. F

Warranty

This product is warranted by Reichert Technologies (herein after referred to as Reichert) against defective material and 

workmanship under normal use for a period of one year from the date of invoice to the original purchaser. (An authorized 

dealer shall not be considered an original purchaser.) Under this warranty, Reichert’s sole obligation is to repair or replace 

the defective part or product at Reichert’s discretion. 
This warranty applies to new products and does not apply to a product that has been tampered with, altered in any way, 

misused, damaged by accident or negligence, or which has had the serial number removed, altered or effaced. Nor shall 

this warranty be extended to a product installed or operated in a manner not in accordance with the applicable Reichert 

instruction manual, nor to a product which has been sold, serviced, installed or repaired other than by a Reichert factory, 

Technical Service Center, or authorized Reichert Dealer. 
Lamps, bulbs, charts, cards and other expendable items are not covered by this warranty. 
All claims under this warranty must be in writing and directed to the Reichert factory, Technical Service Center, or 

authorized instrument dealer making the original sale and must be accompanied by a copy of the purchaser’s invoice. 

This warranty is in lieu of all other warranties implied or expressed. All implied warranties of merchantability or fitness for 

a particular use are hereby disclaimed. No representative or other person is authorized to make any other obligations for 

Reichert. Reichert shall not be liable for any special, incidental, or consequent damages for any negligence, breach of 

warranty, strict liability or any other damages resulting from or relating to design, manufacture, sale, use or handling of the 

product. 

Patent Warranty

If notified promptly, in writing, of any action brought against the purchaser based on a claim that the instrument infringes 

a U.S. Patent, Reichert will defend such action at its expense and will pay costs and damages awarded in any such 

action, provided that Reichert shall have sole control of the defense of any such action with information and assistance (at 

Reichert’s expense) for such defense, and of all negotiation for the settlement and compromise thereof. 

Product Changes

Reichert reserves the right to make changes in design or to make additions to or improvements in its products without 

obligation to add such to products previously manufactured.

Claims for Shortages 

We use extreme care in selection, checking, rechecking and packing to eliminate the possibility of error. If any shipping 

errors are discovered:

1. Carefully go through the packing materials to be sure nothing was inadvertently overlooked when the unit was unpacked. 

2. Call the dealer you purchased the product from and report the shortage. The materials are packed at the factory 

and none should be missing if the box has never been opened. 

3. Claims must be filed within 30 days of purchase. 

Claims for Damages in Transit

Our shipping responsibility ceases with the safe delivery in good condition to the transportation company. Claims for loss 

or damage in transit should be made promptly and directly to the transportation company.
If, upon delivery, the outside of the packing case shows evidence of rough handling or damage, the transportation 

company’s agent should be requested to make a “Received in Bad Order” notation on the delivery receipt. If within 48 

hours of delivery, concealed damage is noted upon unpacking the shipment and no exterior evidence of rough handling is 

apparent, the transportation company should be requested to make out a “Bad Order” report. This procedure is necessary 

in order for the dealer to maintain the right of recovery from the carrier. 

Summary of Contents for Lensometer LensChek Plus













































Reviews: