34
35
15180-101 Rev. F
15180-101 Rev. F
Cleaning & Maintenance
(continued)
Marking Pen Replacement
When the Marking Pens require replacement, follow the proce-
dure below. Replacement Pens can be ordered in a set of 3 (P/N
15180-005).
1. Hold the Marking Lever down so that you can access the
Marking Pens.
2. Push the Marking Pen up, so that the wide plastic Tabs are
above the top of the Pen Holder. Refer to Figure MM-07.
3. Rotate the pen so that the wide Tabs are aligned with the
opening at the top of the Pen Holder. Refer to Figure MM-08.
4. The Marking Pen can be removed by pulling it through the
bottom of the Pen Holder. Refer to Figure MM-09.
5. Install a new Marking Pen by inserting it up through the Pen
Holder, and twisting it so that the side plastic Tabs are aligned
to hold it in place. Refer to Figured MM-10 and MM-11.
Figure MM-10 Marking Pen
Tabs
Figure MM-08 Rotate Pen
Align Tabs With
Openings
Figure MM-11 Replaced Pen
Proper
Orientation
Figure MM-07 Raise Pen
Marking
Pen
Pen
Holder
Figure MM-09 Remove Pen
Marking
Pen
