18
19
15180-101 Rev. F
15180-101 Rev. F
Instrument Setup
(continued)
Instrument Settings
(continued)
Communication Settings
Page 2 of the Setup menu allows you to set the communication parameters for outputting the measurement
values to an external device.
Figure SU-15 Communication Screen
The measurement values are output by selecting “RS232C” or “Both” in the "Output Device” section on page
2 of the Setup screen.
Note:
The output content is same as that of the printout. However, the progressive lens graph is not
outputted.
Output Device:
Printer:
Enables the LensChek Plus/Pro printer. If you press the Printer Icon on the LCD
Screen, the patient data goes to the LensChek Plus/Pro printer.
RS232C:
Enables the RS232C port. If you press the TRANSFER icon on the LCD Screen,
the patient data goes to your computer.
Both:
Enables the data to both be transferred to the RS232C port as well as print the
measurement data.
Auto Comm:
OFF:
Disables Auto Communication.
ON:
Enables Auto Communication, which continuously sends patient data to the computer.
Baud Rate:
Select a Baud rate of 115200, 38400, or 9600.
Note:
If you set “Output Device” to “Printer”, it will disable the Auto Communication feature.
Note:
To view the RS232C wiring interface protocol, refer to the Appendix section of this manual.
