10
SP 0.1, SPR 0.1
Supply voltage: ................................. corresponding with motor supply voltage (max. 250V AC, 5A)
Switching-on temperature: .............................................................................................. +20°C
±
3
°
С
Switching-off temperature: .............................................................................................. +30°C ± 4
°
С
Manual control:
......................................................................................................... with handwheel;
rotating counter-clockwisely (clockwisely) EA output part is moving in direction "Z" ("O")
Output part
backlash:
................................................... max. 1.5°for SP, at load of 5% of load torque
............................................................................ max. <1°for SPR, at load of 5% of load torque
Adjustment of limit positions:
Limit position switches are adjusted with accuracy ± 1°.
Additional position switches are adjusted 15° before end positions.
1.8.2
Mechanical connection
•
flange (ISO 5211)
•
stand and lever
Basic and connecting dimensions are given in dimensional drawings
1.8.3
Electric connection
•
with terminal board (X):
max. 23 terminals, nominal connecting cable size max. 2,5 mm
2
- 3 cable glands: 1xM20x1,5 - connection of cables diameter from 8 to 14,5 and 2x M16x1,5 -
connection of cables diameter from 6 to 10,5 mm .
When using two types of extended cable glands - diameter from 9 to 13 mm (max for 2 positions,
without combination with cable glands from 14 to 18 mm) resp. diameter from 14 to 18 mm (just for
one position).
with protection terminal:
external and internal, mutually connected and marked with protection earthling mark
Electric connection - according to wiring diagrams.
1.9 Conservation, packing, transport, storing and unpacking
Surfaces without surface treatment are treated by conservation preparation MOGUL LV 2-3
before packaging .
Conservation is not necessary if the following storage conditions are complied with:
• Storage temperature: -10 to +50 °C
• Relative air humidity max.80 %
• Electric actuators and their accessories must be stored in dry, well ventilated covered spaces,
protected against impurities, dust, soil humidity (by placement to racks, or on palettes), chemicals
and foreign interventions
• There shall be no corrosive gases present in the storage areas.
The
EA SP or SPR
are delivered in solid packages guaranteeing resistance in accordance with
EN 60 654 (IEC 60 654-1 and IEC 60 654-3).
Package is a box. Products in boxes is possible to load on the pallets (pallet is returnable). On
the outer side of the package is stated:
•
manufacturer label,
•
name and type of product,
•
number of pieces,
•
other data – notices and stickers.
The forwarder is obliged to secure packed products, loaded on transportation means, against
self-motion; if open transportation means are used, to secure their protection against atmospheric
precipitations and splashing water. Displacement and securing of products in transportation means
must provide their stable position, exclude the possibility of their inter-collision and their collision with
the vehicle walls.
Summary of Contents for SP 0.1
