Regada SP 0.1, Installation, Service And Maintenance Instructions, Page: 11 / 35

SP 0.1, SPR 0.1 9
................................................................................................................................. "O“
±
0,1 mA
EPV and capacitive transmitter linearity error: ........................................................................
±
2 %
1)
EPV and capacitive transmitter hysteresis:................................................................... max. 1.5 %
1)
1)
from rated value of transmitter referred to output values
Electronic position controller (N)
Controller software equipment:
A) Function and parameters
programmable functions:
•
..with functional buttons SW1, SW2 and LED diodes D3 , D4 directly placed on controller
•
..with computer or terminal equipped with corresponding programme, using RS 232 interface.
programmable parameters:
•
..control signal
•
..response to SYS-TEST signal
•
..mirroring (ascending/descending characteristics)
•
..insensitiveness
•
..EA limit positions (only with computer and ZP2 programme)
•
..way of regulation
B) Operation states of controller
Error message from error memory: (using LED diodes and RS 232 and personal computer)
•
..control signal missing or faulty
•
.. input value of current control signal under 3.5 mA
•
..existence of SYS-TEST signal
•
..activity of switches
•
..failure of feedback position transmitter
Statistic data: (using RS 232 and personal computer)
•
..number of controller operation hours
•
..frequency of relay switching in direction "opening"
•
..frequency of relay switching in direction "closing"
Supply voltage: ................................................................ terminal 61 (L1) -1(N) - 230 V AC, ±10%
Frequency: ................................................................................................................ 50/60 Hz ±2%
Input control signals - analogue: .................................................................................... 0 - 20 mA
..................................................................................................................................... 4 - 20 mA
........................................................................................................................................ 0 - 10 V
(Actuator opens at rising of control signal.)
Controller linearity: ................................................................................................................ 0.5 %
Controller insensitiveness: ............................................................................ 1 - 10% (adjustable)
Feedback (position transmitter): ........................................................ resistive 100 up to 10,000
Ω
.................................................................................................................. current 4 up to 20 mA
Power outputs: ............................................................................................... 2x relay 5A/250V AC
Digital outputs: ........ 4x LED (supply, error, adjustment, "opening", "closing" - with two-colour LED)
Error status: .................................................................................... control switch 24 V, 2W - POR
Reaction at error situation: ................................................. transmitter error - error message LED
Control signal missing: ................................................................................... error message LED
SYS mode: ........................................................................................................ error message LED
Adjusters: ................................................................................................ communication connector
.............................................................................................. 2x calibrating and adjusting button
Switching-off:
Switching-off voltage: 250 V(AC); 50/60 Hz; 6(4) A; cos
ϕ
=0,6, resp.: 24 V (DC); 2 A; T=L/R=3ms
Space heater (
Е
1)
Space heater - supply voltage: ................ corresponding with motor supply voltage (max. 250 V AC)
Space heater power output: .................................................................................... max. 10 W/55°C
Thermal switch of space heater