www.reechcraft.com/PowerMast
888-600-6160
39
secti
On
4
POwER SYSTEM INSTALLATION
6. Check to be sure the chuck key is removed from the drill chuck before
turning on the tool.
7. Place the drill with driver into the drill bracket, align the driver to the
gearbox input shaft and press lightly downward until driver fully seats on
the input shaft. Important: The drill with driver must be able to insert
freely through the drill bracket and on to the input shaft. Remove any
obstructions and make necessary adjustments so the drill can be inserted
freely.
8. The drill bracket is designed to hold the drill on the gearbox input shaft
and also keep the drill body from rotating during operation. Be sure the
drill bracket is secure and functioning properly before proceeding. Adjust
the clasp vertically to fit the drill collar. Adjust the drill so the cord is out
of the way (Fig. 4.3) and tighten the drill bracket wing nuts. Important:
Periodically check and adjust the wing nuts to ensure a secure fit.
DRILL INSTALLATION
Fig. 4-2
Fig. 4-3
Dril must
insert freely!
