www.reechcraft.com/PowerMast
888-600-6160
43
secti
On
5
OPERATING THE SYSTEM
6. To lower the work platform, reverse the drill to the counter-clockwise
direction, lift up on the lock lever with the other hand, then pull the trigger
on the drill while holding the lock lever. Note: On occasion, the lock lever
may be engaged into the track and will need to be released before going
down. Lift the system up slightly until lock lever is released, then proceed
with lowering. Important: While lowering the platform, it is best to come
to a complete stop by releasing the drill trigger first, coasting to a stop,
and then dropping the lever. In the unlikely event that the system
becomes unstable during lowering, drop the lock lever immediately.
(Fig 5.3)
OPERATING WORK PLATFORM (CONT’D)
Fig. 5-3
Lift and hold when lowering
Release to stop
