distance away from non-system electrical lines.
7. Be sure the ground will support the bearing forces of the system in
accordance with this operators manual.
8. Always carry out maintenance and inspection as detailed in this manual
to help ensure system safety and efficiency. Be sure to manage all
jobsite inventory and ensure proper inspection and maintenance has
been conducted on all system components prior to use.
9. Never make modifications to the system. Always use factory
manufactured parts on the system. Modifications to the system, or
configuring in a manner other than detailed in this manual and other
ReechCraft publications will void the warranty and could lead to
equipment damage or personal injury. If you have any questions on
components or accessories and how they should be used, contact your
local dealer or call ReechCraft customer service.
10. Be sure you have the proper guardrails, endrails, midrails, and
toeboards properly installed.
11. Once system is installed and prior to operation, provide a barrier as
necessary surrounding the work area below the work platform in
accordance with federal, state, and local regulations. Prepare an
emergency escape plan and keep a telephone list of emergency
numbers.
12. Never overload the system beyond the duty rating of 750 lbs (340 kg).
Refer to the loading section of the user manual for more information.
Although the system is designed with large safety factors, excessively
overloading the system could create system instability or structural
damage which may result in personal injury or death.
13. The work platform should not be raised higher than 194 ft (59.1 m). For
system configurations not detailed in this manual, consult with
ReechCraft engineering team.
14. Always keep hands, limbs, and clothing a safe distance away from any
moving parts.
15. Be sure all switches are off before connecting any electrical cords.
16. When working from any platform above the ground, do not overreach.
Keep proper footing and balance at all times.
17. Be sure system is lowered to the ground prior to entering or exiting the
platform.
18. In the event of a system abnormality that could cause a safety hazard,
contact the worksite supervisor immediately.
19. The system should never be operated during an electrical storm.
20. Wind speeds must not exceed 25 mph (11.2 m/s) during erection and
dismantling. In service wind speeds must not exceed 35 mph
(15.6 m/s).
21. For repairs of service questions, contact your local dealer or call
ReechCraft customer service.
www.reechcraft.com/PowerMast
888-600-6160
7
secti
On
SAFETY GUIDELINES
1
