www.reechcraft.com/PowerMast
888-600-6160
35
secti
On
Securing the Tie
Fasten the tie to both rear masts by securing the twist lock assembly. Secure
all four bolts and make sure the locking flange is fully engaged into the mast
channel. (See figure 1.17)
Fig. 1.16
Proper Flange Orientation
Fig. 1.17
Important:
Locking flange MUST be fully secured into the mast channel
so it is captured fully. Inspect prior to elevating past the tie.
1
1
Twist Lock Assembly
Horizontal
ERECTING THE SYSTEM: FREE-STANDING BASE SPECIAL INSTRUCTIONS
3
