Installation Instructions
ALL WIRING AND INSTALLATION MUST BE
SUPERVISED BY A SUITABLY QUALIFIED
PERSON.
We recommend that the installation be done in
the following sequence: -
a) Fix the shower to the wall
b) Plumbing
c) Electrical connections
d) Commissioning
Warning! Do Not Install The Shower In A
Room Where It May Be Subject To Freezing
a) Fix The Shower To The Wall
When deciding where to place the unit a few
things need to be taken into consideration: -
1) The unit MUST NOT be mounted directly
in the path of the spray from the handset
2) The handset could be used over a sink for
hair washing.
3) The handset does not come into contact
with the used water in the cubicle, bath or
basin.
A hose retainer is supplied with the
Accessories (See Diagrams 27 & 28).
4) The unit can be mounted at a lower level for
less able users combined with optional
extended hose and riser rail.
The installation must comply with BS 8300:
2018.(Design of buildings and their
approaches to meet the needs of disabled
people. Code of practice).Remembering to
Adhere to point 1.
5) Choose a flat piece of wall to avoid the
possibility of distorting the backplate and
making the front cover a poor fit.
3
Mains cold water supply
(either top, bottom
or rear entry)
Height of spray head
and shower to suit
user’s requirements
A TYPICAL INSTANTANEOUS ELECTRIC SHOWER INSTALLATION
User Information
Product Dimensions
How To Use Your Shower
How Your Shower Works
Handset Operation
Routine Maintenance
Periodical Maintenance
Trouble Shooting (User)
BEAB Care Wash Scheme
Installation Summary
Guarantee
Contents
Installer Information;-
Product Dimensions
Installation Instructions
Plumbing Connections
Electrical Connections
Changing The Operation Mode
Templock/Normal
Changing ‘DIP Switch’ Default Setting
Commissioning
Trouble Shooting (Installer)
BEAB Care Wash Scheme
Spares
Page
Page
2
3
5
7
9
9
11
19
20
21
2
12
16
18
18
19
19
20
21
24
