8-MENU ITEMS AND OPERATION
54
OPERATING MODE
The operating mode for hydro stoves is AUTOMATIC only (manual mode is not envisioned). Flame modulation is managed according to
the "System configuration" of the room probe placed on the rear of the appliance (see drawing), by the external thermostat, by the boiler
water temperature or by the NTC probes.
START-UP
Press key
1
(esc) to begin start-up, the control panel displays ON with a flashing flame. When the flame stops flashing the stove has
reached the "power output" operating mode.
The room temperature set by default is 20°C, if one wishes to change it act as instructed in the adjustments menu; act likewise to set the
heating water temperature and the room fan speed. To activate external thermostat if any see the relative section.
POWER OUTPUT
Once the start-up stage is complete the control panel will display ON with a fixed flame at level 3
. The subsequent flame modulation
at lower or higher powers is managed autonomously and upon reaching the temperatures set in the "System configuration".
