3-DRAWINGS AND TECHNICAL SPECIFICATIONS
21
Technical Dept. - All rights reserved - Reproduction is prohibited
TECHNICAL CHARACTERISTICS
LOTUS HYDRO
Nominal output power
:
:
24,8 kW (21328 kcal/h)
Nominal output power
(water):
:
22,7 kW (19522 kcal/h)
Minimum output power:
6,0 kW (5160 kcal/h)
Minimum output power (water):
5,0 kW (4300 kcal/h)
Efficiency at Max
91.6%
Efficiency at Min
95.1%
Temperature of exhaust smoke at Max
120 °C
Temperature of exhaust smoke at Min
70 °C
Particulate/OGC / Nox (13%O
2
)
7 mg/Nm
3
- 5.4 mg/Nm
3
- 138 mg/Nm
3
(13% O
2
)
CO at 13% O
2
at Min and at Max
0,024% – 0,008%
CO
2
at Min and at Max
5,8% - 9,5%
Permissible max. water pressure
2,5 bar (250 kPa)
Recommended draught at Max power
0,10 mbar - 10 Pa***
Recommended draught at Min power
0,02 mbar - 2 Pa
Mass of smoke
17,1 g/sec
Hopper capacity
106 litri
Type of pellet fuel
Pellet diameter 6-8 mm and size 3/40 mm
Pellet hourly consumption
Min ~ 1.2 kg/h* - Max ~ 5.2 kg/h*
Autonomy
At min ~ 60 h* - At max ~ 14 h*
Heatable volume m
3
533/40 – 609/35 – 711/30 **
Combustion air inlet
External diameter 80 mm
Smoke outlet
External diameter 100 mm
Air intlet
80 cm
2
Rated electrical power (EN 60335-1)
120 W (Max 430 W)
Supply voltage and frequency
230 Volt / 50 Hz
Net weight
210 kg
Weight with packaging
230 kg
Distance from combustible material (rear)
100 mm
Distance from combustible material (sides)
100 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).
