Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual

Page: 300 / 318

Appendix D. Probes
288
• Space Available — The file size available to the current file system.
Field Value
Device Pathname* /dev/hda1
Critical Maximum File System Used
Warning Maximum File System Used
Critical Maximum Space Used
Warning Maximum Space Used
Critical Maximum Space Available
Warning Maximum Space Available
Table D.63. RHN Satellite::Disk Space settings
D.10.2. RHN Satellite::Execution Time
The RHN Satellite::Execution Time probe monitors the execution time for probes run from a Satellite
and collects the following metric:
• Probe Execution Time Average — The seconds required to fully execute a probe.
Field Value
Critical Maximum Probe Execution Time Average
Warning Maximum Probe Execution Time Average
Table D.64. RHN Satellite::Execution Time settings
D.10.3. RHN Satellite::Interface Traffic
The RHN Satellite::Interface Traffic probe monitors the interface traffic on a Satellite and collects the
following metrics:
• Input Rate — The amount of traffic in bytes per second the device receives.
• Output Rate — The amount of traffic in bytes per second the device sends.
Field Value
Interface* eth0
Timeout (seconds)* 30
Critical Maximum Input Rate
Critical Maximum Output Rate
Table D.65. RHN Satellite::Interface Traffic settings
D.10.4. RHN Satellite::Latency
The RHN Satellite::Latency probe monitors the latency of probes on a Satellite and collects the
following metric:
• Probe Latency Average — The lag in seconds between the time a probe becomes ready to run
and the time it is actually run. Under normal conditions, this is generally less than a second. When