Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual, Page: 170 / 318

Chapter 8. Monitoring
158
8.2.1. Probes requiring the daemon
An encrypted connection, either through the Red Hat Network Monitoring Daemon or
sshd
, is required
on client systems for the following probes to run:
• Linux::CPU Usage
• Linux::Disk IO Throughput
• Linux::Disk Usage
• Linux::Inodes
• Linux::Interface Traffic
• Linux::Load
• Linux::Memory Usage
• Linux::Process Counts by State
• Linux::Process Count Total
• Linux::Process Health
• Linux::Process Running
• Linux::Swap Usage
• Linux::TCP Connections by State
• Linux::Users
• Linux::Virtual Memory
• LogAgent::Log Pattern Match
• LogAgent::Log Size
• Network Services::Remote Ping
• Oracle::Client Connectivity
• General::Remote Program
• General::Remote Program with Data
Note that all probes in the Linux group have this requirement.
8.2.2. Installing the Red Hat Network Monitoring Daemon
Install the Red Hat Network Monitoring Daemon to prepare systems for monitoring with the probes
identified in
Section 8.2.1, “Probes requiring the daemon”
. Note that the steps in this section
are optional if you intend to use
sshd
to allow secure connections between the RHN monitoring
infrastructure and the monitored systems. Refer to
Section 8.2.3, “Configuring SSH”
for instructions.