Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual

Page: 157 / 318

Probe Status —
145
Initiate monitoring of a system through the
Probes
tab of the
System Details
page. Refer to
Section 7.4.2.9, “System Details”
for a description of the tab. See
Appendix D, Probes
for the complete
list of available probes.
7.10.1. Probe Status —
The
Probe Status
page is shown by default when you click
Monitoring
in the top navigation bar.
The
Probe Status
page displays the summary count of probes in the various states and provides a
simple interface to find problematic probes quickly. Please note that the probe totals in the tabs at the
top of the page may not match the numbers of probes displayed in the tables below. The counts at the
top include probes for all systems in your organization, while the tables display probes on only those
systems to which you have access through the System Group Administrator role. Also, the probe
counts displayed here may be out of sync by as much as one minute.
The following list describes each state and identifies the icons associated with them:
•
—
Critical
- The probe has crossed a CRITICAL threshold.
•
—
Warning
- The probe has crossed a WARNING threshold.
•
—
Unknown
- The probe is not able to accurately report metric or state data.
•
—
Pending
- The probe has been scheduled but has not yet run or is unable to run.
•
—
OK
- The probe is running successfully.
The
Probe Status
page contains tabs for each of the possible states, as well as one that lists all
probes. Each table contains columns indicating probe state, the monitored system, the probes used,
and the date and time the status was last updated.
In these tables, clicking the name of the system takes you to the
Probes
tab of the
System Details
page. Clicking the name of the probe takes you to its
Current State
page. From there, you may edit
the probe, delete it, and generate reports based upon its results.
Monitoring data and probe status information that was previously availble only through the web
interface of the Satellite can now be exported as a CSV file. Click on the
Download CSV
links
throughout the Monitoring pages to download CSV files of relevent information. The exported data
may include, but is not limited to:
• Probe status