Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual

Page: 273 / 318

General::TCP Check
261
Field Value
Warning Minimum Value
Critical Minimum Value
Table D.11. General::SNMP Check settings
D.4.4. General::TCP Check
The General::TCP Check probe tests your TCP server by verifying that it can connect to a system via
the specified port number. It collects the following metric:
• Remote Service Latency — The time it takes in seconds for the TCP server to answer a connection
request.
The probe passes the string specified in the
Send
field upon making a connection. The probe
anticipates a response from the system, which should include the substring specified in the
Expect
field. If the expected string is not found, the probe returns a CRITICAL status.
Field Value
Send
Expect
Port*
1
Timeout* 10
Critical Maximum Latency
Warning Maximum Latency
Table D.12. General::TCP Check settings
D.4.5. General::UDP Check
The General::UDP Check probe tests your UDP server by verifying that it can connect to a system via
the specified port number. It collects the following metric:
• Remote Service Latency — The time it takes in seconds for the UDP server to answer a connection
request.
The probe passes the string specified in the
Send
field upon making a connection. The probe
anticipates a response from the system, which should include the substring specified in the
Expect
field. If the expected string is not found, the probe returns a CRITICAL status.
This probe's transport protocol is User Datagram Protocol (UDP).
Field Value
Port* 1
Send
Expect
Timeout*
10
Critical Maximum Latency
Warning Maximum Latency
Table D.13. General::UDP Check settings