Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual

Page: 97 / 318

Systems
85
Once the probe has been added, you must reconfigure your Monitoring
infrastructure to recognize it. Refer to
Section 7.10.4, “Scout Config Push —
”
for details. After the probe has run, its results become available on
the
Current State
page. Refer to
Section 7.10.1.7, “Current State —
”
for details.
To remove a probe from a system, click on the name of the probe, then click the
delete probe
link in
the upper right corner. Finally, click the
Delete Probe
button to complete the process.
7.4.2.9.5.3. System Details � Groups —
This tab and its subtabs allow you to manage the system's group memberships.
7.4.2.9.5.3.1. System Details � Groups � List/Leave —
This subtab lists groups to which the system belongs and enables you to cancel those
associations. Only System Group Administrators and Satellite Administrators can
remove the system from groups. Non-admins just see a
Review this system's group
membership
page. To remove the system from groups, select the groups' checkboxes
and click the
Leave Selected Groups
button. Click on a group's name to go to its
System Group Details
page. Refer to
Section 7.4.3.3, “System Group Details —
”
for more information.
7.4.2.9.5.3.2. System Details � Groups � Join —
Lists groups that the system may be subscribed to. Only System Group Administrators and Satellite
Administrators can add the system to groups. Non-admins see a
Review this system's group
membership
page. To add the system to groups, select the groups' checkboxes and click the
Join
Selected Groups
button.
7.4.2.9.5.4. System Details � Events
Displays past, current, and scheduled actions on the system. You may cancel pending events here.
The following sections describe the
Events
sub-tabs and the features they offer.
7.4.2.9.5.4.1. System Details � Events � Pending
Lists events that are scheduled but have not begun. A prerequisite action must complete successfully
before a given action is attempted. If an action has a prerequisite, no checkbox is available to cancel
that action. Instead, a checkbox appears next to the prerequisite action; canceling the prerequisite
action causes the action in question to fail.