manualshive.com logo in svg

Red Hat NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT, Reference Manual

The Red Hat Network Satellite 5.3.0 - CHANNEL MANAGEMENT is a powerful product that simplifies managing channels for your network. Stay updated with the latest enhancements and features by accessing the comprehensive Release Note and manual, available for free download at manualshive.com. Boost productivity and streamline channel management effortlessly.

Share
Download
background image

Admin

151

Typically, the defaults provided in other fields are acceptable, since they are derived from your Satellite
installation. Nevertheless, you may use the fields on this page to alter your Monitoring configuration.
For instance, you may change your mail exchange server here. This page also allows you to alter the
destination of all administrative emails from the Satellite. When finished, click 

Update Config

.

7.11. Admin

The 

Admin

 page allows RHN Satellite customers to manage the basic configuration of the Satellite,

including creating and managing the Organizations feature of RHN Satellite. Only the Satellite
Administrator can access the 

Admin

 page.

7.11.1. Admin � Organizations

The 

multiple organizations

 feature allows administrators to to create and manage multiple

organizations across the Satellite. The Organizations feature allows administrators to appropriate
software and system entitlements across various organizations, as well as control an organization's
access to systems management tasks. For more information about using the multiple organizations
feature, refer to 

Chapter 9, Multiple Organizations

.

7.11.2. Admin � RHN Satellite Configuration

This tab is broken down into subtabs that allow you to configure most aspects of the RHN Satellite.
Once changes have been made, it is important to restart the Satellite, which may be accomplished on
the final tab.

7.11.2.1. Admin � Satellite Configuration � General

The 

Satellite Configuration � General Configuration

 page allows you to alter the most basic

Satellite settings, such as the admin email address and whether Monitoring is enabled.

7.11.2.2. Admin � Satellite Configuration � Monitoring

The 

RHN Satellite Configuration � Monitoring

 page allows you to configure the monitoring

aspects of this Satellite. The local mail exchanger and local main domain are used to mail monitoring
notification messages to administration. This is required only if you intend to receive alert notifications
from probes. If you do, provide the mail server (exchanger) and domain to be used. Note that

sendmail

 must be configured to handle email redirects of notifications. When finished, click 

Update

Config

.

7.11.2.3. Admin � Satellite Configuration � Certificate

The 

RHN Satellite Configuration � Certificate

 page allows you to either upload a new Satellite

certificate. To identify the certificate's path, click 

Browse

, navigate to the file, and select it. To input its

contents, open your certificate in a text editor, copy all lines, and paste them directly into the large text
field at the bottom. Red Hat recommends using the file browser as it is less error prone. Click 

Update

to continue. If you receive errors related to DNS, ensure your Satellite is configured correctly.

7.11.2.4. Admin � Satellite Configuration � Bootstrap Script

The 

RHN Satellite Configuration � Bootstrap

 page allows you to generate a bootstrap script for

redirecting client systems from the central RHN Servers to the Satellite. This script, to be placed in

Summary of Contents for NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT

IBM BladeCenter HS22 Product Manual preview
BladeCenter HS22
Brand: IBM Pages: 18
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Brand: Qlogic Pages: 20
Datacom DM-SV01 Product Manual preview
DM-SV01
Brand: Datacom Pages: 89
IBM BladeCenter JS20 Installation And User Manual preview
BladeCenter JS20
Brand: IBM Pages: 132
IBM Power AC922 8335-GTW Handbook preview
Power AC922 8335-GTW
Brand: IBM Pages: 70
Exsys EX-6112PoE Manual preview
EX-6112PoE
Brand: Exsys Pages: 24
AXIOMTEK NA-1301 Hardware Installation Manual preview
NA-1301
Brand: AXIOMTEK Pages: 55
360 Systems MAXX-1200-HD Operation Manual preview
MAXX-1200-HD
Brand: 360 Systems Pages: 148
Fibrenetix SVS Series Quick Installation Manual preview
SVS Series
Brand: Fibrenetix Pages: 17
Lantronix xPort Pro XPP1004000-02R Integration Manual preview
xPort Pro XPP1004000-02R
Brand: Lantronix Pages: 17
Belkin F1UP0001uk Basic Manual preview
F1UP0001uk
Brand: Belkin Pages: 8
CNET CNP-101UW Specifications preview
CNP-101UW
Brand: CNET Pages: 2
LiveU LU2000 Installation Manual preview
LU2000
Brand: LiveU Pages: 14
TYAN GT24-B7016-LE Service Engineer'S Manual preview
GT24-B7016-LE
Brand: TYAN Pages: 70
IBM System x3550 M3 Installation And User Manual preview
System x3550 M3
Brand: IBM Pages: 160
IBM System x3650 M4 Type 7915 Installation And User Manual preview
System x3650 M4 Type 7915
Brand: IBM Pages: 192
IBM x3750 M4 Installation And Service Manual preview
x3750 M4
Brand: IBM Pages: 694
IBM System x3755 M3 7164 Installation And User Manual preview
System x3755 M3 7164
Brand: IBM Pages: 126

Brands by name

Popular brands

Load more brands