Red Hat NETWORK 3.6 - Reference Manual Download Page 95

Page: 95 / 198

Chapter 6. Red Hat Network Website

6.4.4.8. System Set Manager

Misc —

Misc

— Tools to update System Profiles and preferences for the system set. Here are the tools broken

down by section:

6.4.4.8.1. System Set Manager

Misc

System Profile Updates —

Clicking

Update Hardware Profile

, then the

Confirm Refresh

button schedules a hardware profile

update. Clicking

Update Package Profile

, then the

Confirm Refresh

button schedules a package

profile update.

6.4.4.8.2. System Set Manager

Misc

Custom System Information —

Clicking

Set a custom value

then the name of a key allows you to provide values for all selected

systems. Enter the information and click the

Set Values

button. Clicking

Remove a custom value

then the name of a key allows you to remove values for all selected systems. Click the

Remove

Values

button to finalize the deletion.

6.4.4.8.3. System Set Manager

Misc

Reboot Systems —

Selecting the appropriate systems and then clicking the

Reboot Systems

link sets those systems for

reboot. To immediately cancel this action, click the

list of systems

link that appears within the confir-

mation message at the top of the page, select the systems, and click

Unschedule Action

6.4.4.8.4. System Set Manager

Misc

Lock Systems —

Selecting the appropriate systems and then clicking the

Lock Systems

link prevents the scheduling of

any action through RHN that would affect the systems. This can be reversed by clicking the

Unlock

Systems

link.

6.4.4.8.5. System Set Manager

Misc

Delete Systems —

Clicking

Delete System Profiles

, then the

Confirm Deletions

button removes the selected profiles

permanently.

6.4.4.8.6. System Set Manager

Misc

Upgrade System Entitlements —

Clicking

Upgrade to * Entitlement

increases the service level for as many selected systems as pos-

sible.

6.4.4.8.7. System Set Manager

Misc

System Preferences —

Toggling the

Yes

and

radio buttons and then clicking the

Change Preferences

button alters your

notification preferences for the selected systems. All of these preferences may also be applied to

systems individually through the

Properties

subtab of the

System Details

page. Refer to Section

6.4.2.6.1.2

System Details

Details

Properties

for instructions.

Summary of Contents for NETWORK 3.6 -







































































































































































































Search results

Summary of Contents for NETWORK 3.6 -

Reviews:

Brands by name

Popular brands

Red Hat NETWORK 3.6 -, Reference Manual

Search results

Summary of Contents for NETWORK 3.6 -

Reviews:

Brands by name

Popular brands