Red Hat NETWORK 3.6 -, Reference Manual

Page: 91 / 198

Chapter 6. Red Hat Network Website 79
System Set Manager
or
System Details
pages. Refer to Section 6.4.4 System Set Manager — or
Section 6.4.2.6 System Details , respectively.
6.4.3.3.3. System Group Details Target Systems —
Target Systems
— List of all systems in your organization. This tab enables you to add systems to
the specified system group. Merely select the systems using the checkboxes to the left and click the
Add Systems
button on the bottom right-hand corner of the page.
6.4.3.3.4. System Group Details Errata —
List of relevant Errata for systems in the system group. Clicking the Advisory takes you to the Details
tab of the
Errata Details
page. (Refer to Section 6.5.2.2 Errata Details for more information.) Click-
ing the Affected Systems number lists all of the systems addressed by the Errata. To apply the Errata
Updates in this list, select the systems and click the
Apply Errata
button.
6.4.3.3.5. System Group Details Admins —
List of all organization users that potentially have permission to manage the system group. Organiza-
tion Administrators are clearly identified. System Group Administrators are marked with an asterisk
(*). To change the system group’s users, select and unselect the appropriate checkboxes and click the
Update
button.
6.4.4. System Set Manager —
The
System Set Manager
allows you to perform many actions possible individually through the
System Details page on multiple systems at once, including:
•
Apply Errata updates
•
Upgrade packages to the most recent versions available
•
Add/remove systems to/from system groups
•
Subscribe/unsubscribe systems to/from channels
•
Update system profiles
•
Modify system preferences such as scheduled download and installation of packages
•
Kickstart or re-install entire several Provisioning-entitled systems at once
•
Set the subscription and rank of configuration channels for Provisioning-entitled systems
•
Tag the most recent snapshots of your selected Provisioning-entitled systems
•
Revert Provisioning-entitled systems to previous snapshots
•
Run remote commands on Provisioning-entitled systems through the RHN website
Before performing actions on multiple systems, you must select systems you wish to modify. Note that
Update-level systems cannot be selected. Pages including
Systems
list,
System Search
, and
System
Groups list have a column of checkboxes under the Select heading. Mark the checkboxes beside the
systems or groups you want to select, and click the
Update List
button below the column to add them
to the System Set Manager .