Red Hat NETWORK 3.6 -, Reference Manual

Page: 181 / 198

Appendix C. Probes 169
Field Value
Warning Maximum Space Used
Critical Maximum Space Available
Warning Maximum Space Available
Table C-64. RHN Satellite Server::Disk Space settings
C.10.3. RHN Satellite Server::Execution Time
The RHN Satellite Server::Execution Time probe monitors the execution time for probes run from a
Satellite and collects the following metric:
•
Probe Execution Time Average — The seconds it takes to fully execute a probe.
Field Value
Critical Maximum Probe Execution Time Average
Warning Maximum Probe Execution Time Average
Table C-65. RHN Satellite Server::Execution Time settings
C.10.4. RHN Satellite Server::Interface Traffic
The RHN Satellite Server::Interface Traffic probe monitors the interface traffic on a Satellite and
collects the following metrics:
•
Input Rate — The amount of traffic in bytes per second the device receives.
•
Output Rate — The amount of traffic in bytes per second the device sends.
Field Value
Interface* eth0
Timeout (seconds)* 30
Critical Maximum Input Rate
Critical Maximum Output Rate
Table C-66. RHN Satellite Server::Interface Traffic settings
C.10.5. RHN Satellite Server::Latency
The RHN Satellite Server::Latency probe monitors the latency of probes on a Satellite and collects
the following metric:
•
Probe Latency Average — The lag in seconds between the time a probe becomes ready to run and
the time it is actually run. Under normal conditions, this will generally be less than a second. When