Red Hat NETWORK 3.6 -, Reference Manual

Page: 43 / 198

Chapter 2. Red Hat Update Agent 31
2.4.1. Using the Red Hat Update Agent Configuration Tool
You must be root to run the
Red Hat Update Agent Configuration Tool
. If you start the
Red Hat
Update Agent Configuration Tool as a standard user, you will be prompted to enter the root password
before proceeding. The
Red Hat Update Agent Configuration Tool
can be started by typing the
command
up2date-config
at a shell prompt (for example, an xterm or a gnome-terminal).
2.4.1.1. General Settings
The
General
tab allows you to enable an HTTP Proxy Server. If your network connection
requires you to use an HTTP Proxy Server to make HTTP connections, select the Enable HTTP
Proxy option and type your proxy server in the text field with the format http://HOST:PORT.
For example, to use the proxy server http://squid.mysite.org on port 3128, you would enter
http://squid.mysite.org:3128
in the text field. Additionally, if your proxy server requires
a username and password, select the
Use Authentication
option and enter your username and
password in the respective text fields.
Figure 2-24. General Settings
In addition, RHN Proxy and Satellite customers have the option of selecting Red Hat Network Servers
here. These customers should refer to the RHN Client Configuration Guide for detailed instructions.
2.4.1.2. Retrieval/Installation Settings
The Retrieval/Installation tab allows you to customize your software package retrieval and package
installation preferences.
Warning
You must use
Red Hat Update Agent
Version 2.5.4 or higher to upgrade your kernel automatically.
Red Hat Update Agent will install the updated kernel and configure LILO or GRUB to boot the new
kernel the next time the system is rebooted.