Red Hat NETWORK 3.6 - Reference Manual Download Page 152

Page: 152 / 198

140

Appendix C. Probes

Field

Value

Send
Expect
Timeout*

Critical Maximum Latency
Warning Maximum Latency

Table C-13. General::UDP Check settings

C.4.6. General::Uptime (SNMP)

The General::Uptime (SNMP) probe records the time since the device was last started. It uses the

SNMP object identifier (OID) to obtain this value. The only error status it will return is UNKNOWN.

Requirements

— SNMP must be running on the monitored system and access to the OID must be

enabled to perform this probe.
This probe’s transport protocol is User Datagram Protocol (UDP).

Field

Value

SNMP Community String*

public

SNMP Port*

161

SNMP Version*

Timeout*

Table C-14. General::Uptime (SNMP) settings

C.5. Linux

The probes in this section monitor essential aspects of your Linux systems, from CPU usage to virtual

memory. Apply them to mission-critical systems to obtain warnings prior to failure.
Unlike other probe groups, which may contain one or a few probes that require the Red Hat Network

Monitoring Daemon, every Linux probe needs

rhnmd

to be running on the monitored system.

C.5.1. Linux::CPU Usage

The Linux::CPU Usage probe monitors the CPU utilization on a system and collects the following

metric:

•

CPU Percent Used — The five-second average of the percent of CPU usage at probe execution.

Requirements

— The Red Hat Network Monitoring Daemon (

rhnmd

) must be running on the moni-

tored system to run this probe.

Field

Value

Summary of Contents for NETWORK 3.6 -







































































































































































































Search results

Summary of Contents for NETWORK 3.6 -

Reviews:

Brands by name

Popular brands

Red Hat NETWORK 3.6 -, Reference Manual

Search results

Summary of Contents for NETWORK 3.6 -

Reviews:

Brands by name

Popular brands