Red Hat NETWORK 3.6 -, Reference Manual

Page: 57 / 198

Chapter 5. Red Hat Network Registration Client 45
3. Type the command
rhn_register
at a shell prompt (for example an XTerm or GNOME
terminal
)
4. If you are not running the X Window System, type the command
rhn_register
at a virtual
console or remote terminal. Refer to Section 5.7 Text Mode RHN Registration Client for further
details.
Caution
You must use Python 1.5.2-24 or later with Secure Sockets Layer (SSL) support. If not, the infor-
mation you transfer will not be encrypted. If you have an earlier version of Python, you will see the
message shown in Figure 5-2. To determine the version of Python on your system, use the command
rpm -q python
. It is strongly recommended you use Python 1.5.2-24 or later.
Figure 5-2. Use Python 1.5.2-24 or later
If you have already registered your system and try to register it again, the dialog box shown in
Figure 5-3 will appear. If you continue, it will overwrite your existing Digital Certificate file
(
/etc/sysconfig/rhn/systemid
), and you will create a different System Profile. You will no
longer be able to use your previous System Profile — be sure this is what you want to do before you
choose
Yes
.
If you overwrite an existing system registration, you can delete the unused profile via the website at
https://rhn.redhat.com.
Figure 5-3. Warning: This System Already Registered
The opening screen for the Red Hat Network Registration Client gives you a brief overview of the
services available and the steps required to register (see Figure 5-4). Click
Next
to continue with the
registration process. If you click Cancel , the registration process will end and no information will be
sent.