Red Hat NETWORK 3.6 -, Reference Manual

Page: 89 / 198

Chapter 6. Red Hat Network Website 77
2. Add systems to system groups. (Refer to Section 6.4.3.2 Adding and Removing Systems in
Groups .)
3. Remove systems from system groups. (Refer to Section 6.4.2.6 System Details .)
4. Assign system group permissions to users. (Refer to Section 6.8 Users — .)
As shown in Figure 6-4, the System Groups list displays all of your system groups.
Figure 6-4. System Group List
The System Groups list contains several columns for each group:
•
Select
— Enables you to add groups to the
System Set Manager
. To select groups, mark the
appropriate checkboxes and click the Update button below the column. Selected groups are added
to the
System Set Manager
. After adding groups to the
System Set Manager
, you can use it to
perform actions on them simultaneously. To add an intersection of groups, select them and click the
Work with Intersection
button. To add a union of groups, select them and click the
Work with
Union
button. Refer to Section 6.4.4 System Set Manager — for details.
•
Status — Shows which type of Errata Alerts are applicable to the group or confirms that it is up-
to-date. Clicking on a group’s status icon takes you to the
Errata
tab of its
System Group Details
page. Refer to Section 6.4.3.3 System Group Details — for more information.
The status icons call for differing degrees of attention:
•
— All systems within group are up-to-date
•
— Critical Errata available, update strongly recommended
•
— Updates available and recommended