Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Installation Manual

Page: 228 / 388

Chapter 17. Installing on IBM System z Systems
210
Figure 17.15. Editing a Network Device
Note
Do not use the numbers as seen in this sample configuration. These values will not work
for your own network configuration. If you are not sure what values to enter, contact your
network administrator for assistance.
If you have a hostname (fully qualified domain name) for the network device, you can choose to have
DHCP (Dynamic Host Configuration Protocol) automatically detect it or you can manually enter the
hostname in the field provided.
Finally, if you entered the IP and Netmask information manually, you may also enter the Gateway
address and the Primary and Secondary DNS addresses.
17.16. Time Zone Configuration
Set your time zone by selecting the city closest to your computer's physical location. Click on the map
to zoom in to a particular geographical region of the world.
From here there are two ways for you to select your time zone:
• Using your mouse, click on the interactive map to select a specific city (represented by a yellow dot).
A red
X
appears indicating your selection.