Red Epic Dragon Operation Manual Download Page 95

Page: 95 / 167

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-D

Model

: Includes camera type (EPIC or SCARLET) and sensor type

Version

: Current firmware version.

P.I.N.

: The personal identification number that is specific to your camera.

SVN revision

: The current revision number of your firmware.

Hours of operation

: The number of hours that your camera has been turned on.

MEDIA MENU

The Media Menu is used to format media (SSD) prior to use on the camera as well as to eject (unmount) the

media prior to removal from the camera.
For more information about using media, go to

“Manage Digital Media” on page 108

PLAYBACK

To view clips on the media that’s attached to the camera, go to

Menu

Playback

. In addition to playing clips,

you can change the look of the clips by changing the settings that are available when in Playback mode.

PLAYBACK MENUS

In Playback mode, you can access a pared-down version of the usual menu system. Major differences between

the Playback menu system and the usual menu system are described below:

MEDIA

List all available clips on the attached media.
You can perform the following actions:

: Move selected clip to the Play List.

All

: Move all clips to the Play List.

Apply Image Metadata

: Image data such as color, gain, curves, etc. that were recorded with the image will

be displayed with the playback image. When deselected, the current playback Look settings will be used.

Load

: Closes the menu and brings up the selected clip in Playback mode.

RECORD (EXIT)

Select

Record

to exit Playback mode. You can also press any button that’s mapped to Record to exit Playback

mode.

META

Displays the metadata for the selected clip.

PLAYBACK STATUS BAR

Displays the progress of the clip during playback. When using the touchscreen, you can swipe your finger right

and left to fast-forward and rewind the clip, respectively.

LOWER CONTROLS

From left to right, the screen displays the following: Playback/Record toggle, Histogram, Playback Speed, In

Point Marker, Frame-by-Frame Reverse, Play/Pause toggle, Frame-by-Frame Forward, Out Point Marker, Play

Once/Loop toggle, Playback Direction toggle, and additional Clip/Camera information.

PLAYBACK/RECORD TOGGLE

Toggles between Record mode and Playback mode.

Summary of Contents for Dragon


































































































































































Search results

Summary of Contents for Dragon

Reviews:

Related manuals for Dragon

Brands by name

Popular brands

Red Epic Dragon, Operation Manual

Search results

Summary of Contents for Dragon

Reviews:

Related manuals for Dragon

Brands by name

Popular brands