Red Epic Dragon, Operation Manual

Page: 149 / 167

RED DSMC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0020_V5.1, REV-D | 149
DO NOT USE any other solvents, chemicals or third party cleaning kits because they have not been tested on
RED TOUCH LCD displays and can possibly damage them. Not approved for use on RED TOUCH LCD displays:
Rubbing Alcohol
Isopropyl Alcohol (<90%)
Windex
Pre-packaged lens cleaner containing any additives, such as detergent, anti-static, fragrance, etc.
For proper cleaning and storage, remember to protect the RED TOUCH LCD by storing it in the RED Microfiber
bag.
EVF
Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)
or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto
the lens surface.
REDMOTE SCREEN
Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)
or equivalent to clean the screen on Touchscreen and Non-Touchscreen LCDs.
LENSES
Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)
or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto
the lens surface.
DSMC SIDE HANDLE LCD
Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)
or equivalent to clean the screen on the DSMC SIDE HANDLE LCD.
BACK FOCUS ADJUSTMENT
WARNING: There is a Screw-In metal plug installed in the camera body covering the back focus screw. This plug
must be removed before performing a back focus adjustment. To remove the plug, use a T10 Torx driver.
NOTE: To perform this procedure as written, you must have a PL mount and RED Focus
™
. For more information
on using the RED Focus, see the RED Focus Operation Guide , available at www.red.com/downloads .
Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using a T10
Torx driver. This screw is indicated by a Siemens Star with an arrow pointing to its location.
Back Focus Adjustment Location