Realax ISI 10, Operating Instructions Manual

Page: 6 / 60

6
Operating instructions Peristaltic Pump ISI Series
2 SAfETY
2.1 Explanation of the safety information
This symbol identifies the instructions of this manual,
which must be observed to avoid failure to meet safety
standards.
This symbol identifies the instructions of this manual,
which must be observed to avoid compromising
electrical safety.
This symbol identifies the instructions of this manual,
which must be observed to guarantee the correct
operation of the pump.
!
CAUTION
In this manual the following symbols are used:
2.2 Intended use
The hose pump is exclusively designed for pumping suitable products.
Every other or further use is not in conformance with the intended use. In
case of doubt it is the use which appears to be its intended use judging from
the construction, execution and function of the product. Observing the
instructions in the user’s documentation also belongs to intended use.
Only use the pump in conformance with the intended use described above.
The manufacturer cannot be held responsible for damage or harm result-
ing from use that is not in conformance with the intended use. If you want
to change the application of your hose pump, contact your AxFlow repre-
sentative first.
2.3 Responsibility
The manufacturer does not accept any responsibility for damage or harm
caused by not (strictly) observing the safety regulations and instructions in
this manual and the also supplied documentation, or by negligence during
installation, use, maintenance and repair of the hose pumps mentioned on