Realax ISI 10, Operating Instructions Manual

Page: 15 / 60

15
Operating instructions Peristaltic Pump ISI Series
7.3 Storage for more than 1 month
- Avoid areas open to harsh weather or excessive humidity and
temperatures lower than 0 °C or higher than 30 °C.
- IMPORTANT! Disassemble one of the rollers (see also section 9.4.1
for instructions):
• Remove the front cover
• Remove the roller that is not touching the pump hose
• Mount back the front cover
• Turn the rotor with the help of the motor so that the
remaining roller is not pressing against the pump hose
‐ For storage periods of longer than 30 days, protect the coupling
surfaces (clamps, reducers, motors) with adequate anti-rust
protection
- For storage periods longer than 6 months rotate the rotor a
few turns to prevent damage to bearings and oil seals and to
prevent grease migration.
- Spare hoses should be stored in a dry place away from direct
light.
7.4 Elevation
ISI pumps sizes can be lifted manually. ISI 22 pumps must be lifted by two
people. It is the customer’s responsibility to adhere to local workplace
legislation.
WEIGHTS ISI 10 / 13 ISI 16 ISI 19 ISI 22
Total pump weight
14 kg
30 lbs
23 kg
50 lbs
23 kg
50 lbs
49 kg
108 lbs
Lifting 1 person 2 people